The control system of the glazed tile machine is simple to operate and has high precision. The cutting precision of each piece is less than 0.1mm, which meets the technological requirements. The program runs stably and reliably.

The glazed tile machine is divided into three parts, the roller forming part, the pressing part and the cutting part. The forming part of the roller table is driven by the motor, and the chain drives the rollers to rotate. The pressing part is that the hydraulic cylinder drives the mold to move up and down, which can press the color steel into many sections, which are like glazed tiles. The cutter part is driven by a hydraulic cylinder to move the cutter up and down, which can cut off the colored steel tiles. The production process of the glazed tile pressing machine is as follows: the colored steel plate enters the forming part of the roller table, and then goes to the forming part after forming, and is pressed into equidistant sections, and the cutter is responsible for the fixed-length cutting.

The executive part has a frequency converter drive motor, a hydraulic station motor, and two hydraulic solenoid valves for the cutter.

The detection part of the glazed tile machine includes: the pulse encoder for detecting the length of the colored steel tile, the up and down travel switch for the profile, the up and down travel switch for the cutter, the up and down operation buttons for the profile, the up and down travel button for the cutter, the emergency stop switch, the hydraulic start switch. stop switch, etc.
PLC selects KDN-K306-24AR of KDN-K3 series. It comes with 14 inputs/10 relay outputs, just to meet the input and output requirements. With KDN text screen, it can complete parameter setting, alarm display, help information, production data display and so on. The glazed tile machine needs to use the high-number pulse input function. KDN-K306-24AR has excellent high-number input performance, and the AB phase has strong anti-interference ability.