Recently, widening equipment is widely used by more and more customers due to its multi-purpose characteristics, and many customers have also called to inquire whether all widening equipment can produce a variety of versions? First of all, let’s take a look at the conventional multi-purpose widening equipment, the conventional domestic tile pressing machine equipment original plate width is 1 meter, and the widening color steel equipment is a plate that can be pressed with a width of 1.2 meters, and the general model such as roof tile 840.850.860 wall tile 900.910 and other models of any combination of the widened double-layer equipment can produce four kinds of plates in one machine, that is to say, on the widened equipment can produce the original board of 1.2 meters of board can also produce the original board of 1 meter of board, In this way, the equipment side of the original dual-purpose machine can be used for four purposes. However, not all widening equipment can be used for four purposes in one machine, such as customers require a version of 1.2 meters or 1.25 meters, and the effective width after molding also has corresponding requirements, and a meter of board can not come out of the overall shape effect, this kind of equipment can not be multi-purpose
  Introduction to the maintenance of the whole machine
  1. The maintenance of color steel tile press machine must implement the principle of “paying equal attention to maintenance and prevention”, so that regular maintenance is mandatory, and the relationship between use, maintenance and repair is correctly handled, and it is not allowed to only use and not maintain, only repair and not maintain.
  2. Each team must do a good job of maintenance of all kinds of machinery in accordance with the maintenance procedures and maintenance categories of color steel tile presses, without undue delay, and special circumstances can be extended only after the approval of the special worker in charge, but generally not more than half of the specified maintenance interval.
  3. The maintenance personnel and maintenance department of the color steel tile press should achieve “three inspections and one handover (self-inspection, mutual inspection, full-time inspection and one handover qualified)”, constantly summarize the maintenance experience, and improve the maintenance quality.
  4. The asset management department regularly supervises, inspects the mechanical maintenance of each unit, regularly or irregularly checks the maintenance quality, and rewards the good and punishes the inferior.
  5. In order to ensure that the color steel tile press machine is often in good technical condition, can be put into operation at any time, reduce the failure and shutdown days, improve the mechanical integrity rate, utilization rate, reduce mechanical wear, extend the service life of machinery, reduce mechanical operation and maintenance costs to ensure safe production, it is necessary to strengthen the maintenance of mechanical equipment.
  6. The maintenance of color steel tile pressing machine should ensure quality, according to the specified items and requirements item by item, shall not be omitted or not guaranteed. Maintenance items, maintenance quality and problems found in maintenance should be recorded and reported to the special staff of the department.