There are many factors that determine the life of a tile press, mainly the following three points:

1. The pre-manufacturing quality of the color steel tile press determines the service life. The machines in our factory use 250-350 H just welded frames, which are relatively stronger than the 200…250 channel steel welded frames of ordinary small factories. It has increased a lot, and the machine will not have the phenomenon of color plate deviation on the workbench, and there will be no disadvantages of re-adjustment after hoisting.
2. The choice of raw materials of the color steel tile press determines the service life of the thick plate. The shaft diameter is 70, and the strength is increased relative to 60.63. There will be no hindrance when pressing the thick plate, which will affect the use of the thick plate.
3. The material and forming method of the pressure roller of the color steel tile press. Nowadays, in order to reduce the cost and improve the forming method, many small manufacturers change the whole wheel into a sheet, which has a great impact on the service life of the product.

During the use of the tile press, maintenance measures should be taken. The correct operation process and regular maintenance can effectively improve the production efficiency and quality of the machine and greatly extend its service life. Below, our company summarizes the common knowledge about the maintenance of hydraulic components, hydraulic oil circuits and filters.

Common sense of maintenance of hydraulic components:

1. After the new machine has been put into use for one month, check all oil pipes for deformation or damage. If any abnormalities are found, replace them with new ones in time.
2. After the new machine has been put into use for two months, shut down the machine first to ensure that there is no pressure in the system, check the solid parts at the joints of each accessory and tighten the loose parts.
3. Regularly check each hydraulic component to prevent oil from mixing into the system and affect the normal use of the equipment. Do not use detergent during the cleaning process.

Common sense of hydraulic oil circuit maintenance:

1. Note that the oil temperature of the system should not exceed 70 degrees Celsius, which will lead to deterioration of oil quality and damage to accessories.
2. The machine is fixed to use the hydraulic oil specified by the manufacturer, and it is not allowed to change it at will.
3. After the new machine is put into use, the oil should be changed regularly according to the rules, and the oil tank should be cleaned every time the oil is changed.
4. Regularly check the hydraulic oil level. For example, the hydraulic system should be checked according to the process after maintenance. When the oil level is lower than the oil window, the hydraulic oil should be filled in time.

Common sense of filter maintenance:

1. If the machine tool alarms or the oil quality is not clean and other filters are abnormal, they should be replaced.
2. The air filter on the fuel tank should be checked, cleaned and replaced every 3 months, preferably once a year.
3. The filter should be replaced or cleaned every time the oil is changed.